What should I do if Arlo is unable to discover my device?

 Arlo Support | [cleanturn] | Arlo customer service number - 24/7

If you tried to set up and connect your Arlo device directly to a WiFi router without using an Arlo Smart Hub or base station and Arlo failed to detect the device, read this article.

To troubleshoot a failed device discovery, check the following guidelines:

1. Make sure you're using a 2.4 GHz WiFi network to connect your Arlo device. Only a 2.4 GHz band, not a 5 GHz band, can be used by your Arlo device. How do i setup my arlo camera ?

2. Check to see if your phone or mobile device is linked to the same 2.4 GHz network as the camera you're trying to connect to.

3. Make sure you typed the correct SSID (network name) and password for your WiFi network. The SSID and password for the network are case-sensitive and must be entered exactly as written. You may view your password before submitting it by tapping the password eye symbol.

4. Make sure your smartphone and Arlo aren't too far away from your WiFi router. During the setup procedure, we recommend keeping your camera 10-15 feet (3-4.5 metres) away from your WiFi router. You may relocate the camera to any location within range of your WiFi router once it is set up and connected.

5. While the camera is being discovered, make sure the camera's LED is glowing blue. (The white LED ring on the Arlo Video Doorbell blinks.) If the camera LED blinks for more than two minutes without successfully connecting to your WiFi network, it may time out. Press the sync button again if the camera times out. Throughout the connection process, make sure the LED is blinking blue.

6. When your camera read the QR code, make sure you heard the chime. To complete the onboarding process, you must hear a chime noise from the camera after scanning the QR code. Continue only once the QR code has been scanned and a chime has been heard. 

Get more info at www arlo com support


Comments

Post a Comment

Popular posts from this blog

All About Arlo Modes and Rules | Support | Arlocomsupport.com

Image
You may tell your Arlo system what to do in different situations using modes and rules. When the motion sensor on a given camera is active, for example, you can programme your Arlo system to record a 30-second video and send you an email alert. How do these Arlo Modes and Arlo Rules Work? You have complete control over how and when your cameras respond to motion or sound with Arlo modes. For instance, you probably don't want to get a motion alert in the living room while you're performing yoga. Alternatively, you may wish to use a different mode when you're on vacation than when you're out shopping for an hour. Armed cameras are set to activate when motion is detected (and sound, if you are using Arlo Ultra, Pro series, Q series, or Go series cameras). Armed cameras automatically capture footage for 10 seconds and send notifications. Sound or motion do not activate disarmed cameras. There are no videos recorded, and no notifications are sent. You can tell your Arlo syst...
Read more

What should I do if Arlo is unable to discover my SmartHub or base station during installation?

Image
Follow these procedures if the Arlo app or the Arlo web interface were unable to locate your Arlo SmartHub or Arlo base station . To troubleshoot SmartHub or base station discovery problems: Unplug the Ethernet connection connecting your base station to your router and turn it off. Restart the installation process, but this time ensure sure your base station is connected to your router before turning it on. If Arlo still can't find your base station, check the colour of your base station's Internet LED: The base station fails to connect to your router if the Internet LED does not light after two minutes. Unplug and re-plug the Ethernet cable that connects your base station to your router on both ends. Check to see if your router is turned on. Your base station is connected to your router but unable to connect to the Arlo cloud server if the Internet LED is solid amber. Check to see if your router is turned on and connected to the Internet. If the Internet LED on your base stati...
Read more

How to watch saved video on My Arlo | Arlo Pro Login | Arlocomsupport.com

Image
Assume you're using the Arlo camera and are unable to view the videos you've stored. To watch stored videos, log in to Arlo pro. Go to the login option and enter the right credential in the required field to log in. Select the Login option from the drop-down menu. If you have any questions about these processes, call the Arlo Support phone number and speak with one of the verified representatives. Users frequently report that their base station goes down, rendering their camera useless. They have no idea why the base station is in offline mode. Participate in a debate with specialists to learn the true reason for the base station's downtime. They'll look into the reasons and come up with a solution. The Arlo tech support specialist will provide further information about the solutions.
Read more